2004 Jeep Liberty "refill coolant" Questions

...refill coolant in a 2004 Jeep 3.7L Liberty? How do I drain the coolant and since there is no radiator cap - how do I refill? you drain it from the radiator petcock on the bottom and you fill it from ...

refill coolant overflow jug back to full cold mark dont over fill, if coolant overflow stay empty you have leak either its leaking or you have radiator hoses or radiator leaking coolant.when coolant &

...coolant from the plug under the radiator into a clean bowl. Undo top hose, Replace stat, do up hose again, then refill through the expansion bottle. If it won't take it all due to an airlock, run ...

2002 Jeep Liberty started to overheat after changing coolant hoses and refilling system.Should I replace the Thermostat? most likely you have air in the system and need to get air out remove radiator ...

...refill with coolant. It would only take about 1/2 can of coolant. Air is not hot now but still very warm, a little cooler if on the highway but still warmer than outside air when it's 83 degrees out. ...

...coolant. Once completely drained close the petcock and refill. Only other way would be to get a flush kit which involves cutting a heater hose, inserting a T and running a garden hose through the ...

...Refill cooling system with recommended 50/50 blend of water and coolant. Run engine and heater to purge air from cooling system. Recheck the coolant level once engine is cool. found info on web site ...

refill with straight coolant ( not the premix from the store but rather the non-mixed stuff) you probably wont even have to go back to the mechanic. Your coolant sounds like it is boiling which can be

...rad hose at the engine end of hose..small plastic housing with 2 bolts..make sure you remove coolant bleed plug at top of engine before you refill system..make sure cooling fan is working properly ...

coolant passage that is allowing antifreeze to leak into the engine when under pressure. If the milky appearance is just on the refill cap and the oil on the dipstick looks normal, then you could just