2004 Jeep Liberty "install light bulb car" Questions

Ad

...breaks it works the other lights work on that side.what is wrong make sure the bulbs are all installed correctly. Also if you recently had a tow package installed it could be wired wrong or ...

Ad

Tail light circuit burned out from trailer harness Had a trailer harness installed on my '05 Jeep Liberty, driver side running light circuit is now burned out. Replaced the bulbs to no avail. so I am ...

Ad

...install 12 volt test light (one end of test light to cable end the other to battery post) -- if there is a draw --test light will glow a little --or bright. Now pull one fuse at a time checking the ...

Question about Jeep Liberty

4 Answers

...plugs were NGK brand which I believe stands for No Good ****. timing chain the dash lights will not come on and now my right parking light is out and i replaced the bulb and still nothing. HELP ...

Question about Jeep Liberty

1 Answer

light to be on are: Gas cap left off, not tightened, not installed correctly, or needs to be replaced 02 sensor Engine misfire - error might clear itself after 3 complete warm-up cycles; not restarts,

Question about Ford Cars & Trucks

1 Answer

...the license plate light cover retaining screws and tighten them using a screwdriver. Step 3: Check the lights. Turn on your car to check if your license plate lights are fully

Question about Jeep Liberty

1 Answer

...light or turning signals works, WHAT CAN IT BE????? Are you sure you installed the correct bulbs .Double ck you installed the bulbs in the correct socket and that the bulb #(1157)(3157) is the right ...

...light from rear shelf, arrows. Install in reverse order of removal. NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED ...

Question about Jeep Liberty

2 Answers

light, and a brighter one for brake lights. On some cars if the bulb is installed wrong, the brighter filament will stay on for tail lights. The only other thing I can think of is the wrong bulbs have

...the bulb in the socket without touching the glass with bare hands. Turn the socket about 45° clockwise to install it. Connect the connector to the fog light. Install the fog light mounting

Not finding what you are looking for?
2004 Jeep Liberty Logo

1,144 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2002 Jeep Liberty
2002 Jeep Liberty

1,658 Questions

2005 Jeep Liberty
2005 Jeep Liberty

839 Questions

2003 Jeep Liberty
2003 Jeep Liberty

768 Questions

2006 Jeep Liberty
2006 Jeep Liberty

633 Questions

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...