1991 Jeep Wrangler "lock hubs blazer" Questions

...Tranny to Reverse, roll a few yards Lock/Unlock the Hubs To get back to 2WD: Drive for a few feet in a straight line Unlock the hubs Tranny Neutral Shift xfer caseLet me know how it turns out. ...

...hubs will not lock 1984 k5 blazer. 4 wheel drive will engage but the hubs are not locking in. it has automatic locking hubs. I would remove and clean the internal parts. They tend to get filled with ...

...lock in the front axle when i attempt to put it in four wheel drive thus making the four wheel drive not work. If the locks are manual for the front axle rather than automatic, then try to twist the ...

...hubs. The passenger side hub is very loose and not engaging. Is this difficult to fix? Never messed with them before, any advice would be helpful. thanks Sounds like the spring broke and someone ...

hubs on each side. The vacuum makes the hubs lock into place. If those vacuum lines are damaged or missing, they wont lock. If you have electronic locking hubs, they may need to be replaced. Good luck

hubs are manual look at the center of the front wheels there is a little switch in the center should say lock one way and un lock the other just twist switch to lock on both wheels then pull leaver in

FRONT WHEEEL SEIZED ON MY 86 K5 BLAZER WHAT IS THE PROBLEM IT IS HOW DO I GET THE LOCK OUT HUB OFF TKS bearing has gone out, or break callipers seized up......

blazer into 4 wheel drive Hey Gilbert ,it should be easy sitting in drivers seat all the way forward is 2wd down one is 4wd high next one down is netural and last one down is 4wd low on older cars you

...hubs on front or manual? the manual will have a dial to turn to lock or free. to shift into 4 high this can be done by just moving the shifter into 4hi at slow speeds. to shift into 4lo need to be in ...

...blazer doesn't have hubs? what do you think it could be? it could be the abs but every vehicle has hubs,,,lol sounds like your abs is kicking in. they are referring to the wheel hub/bearing assembly. ...