1991 Jeep Wrangler "horn going" Questions

...going into horn. I have tested horn by directly hooking to the battery and it works. WTF??? Help! Can a relay "work" and still be bad? Check the horn ground. By pass the relay and feed the ...

HORN DID NOT WORK SO WENT AND GOT A FUZE PUT IT IN NOW THE HORN STAYS ON WHY IS THAT? OKAY ARE HORN DID NOT WORK SO WENT AND GOT A NEW FUSE PUT IT IN NOW THE HORN STAYS ON.WHY? A fuse always blows for

...going into the clockspring please rate -jeff the horn pad supplies a ground for the horn relay ...this in turn sends power to the horn...pull the relay...terminals 30 and 86 should have ...

...a test light check the current going to the horn, and try to ground it out to see if it works that way. If it does, then the horn is ok, but the switch in the steering wheel may not be grounding

horn doesn't work Use a test light to see if there is power going to the horn. There could be a blown fuse or you may need a new horn itself.

the dash and hook the horn wires to it. you will find the horn wires in the bundle going along the steering column. you do not need to try and fix the one inside the steering wheel, it is a Jeep thang

horn started going off, the engine would not start, and the flashers started blinking... What is wrong? The horn and the flashers continued to go off for about 5 minutes before stopping. This happened

...jeep dealership. The clockspring is locked under the D/S airbag. If there is no power going to the horn fuse the problem is most likely the clockspring. hope that helps. should still be under ...

...wheel has gone bad. That requires removing the horn pad from the wheel and possibly going deeper into the top of the wheel to find the problem. (most often you won't need to go that far