...headlights wont turn on i have changed the headlight switch, dimmer turn signal, fuse, bulbs and still can not get the low beams working. it will turn on hi beams for passing but will not stay on ...
Question about Jeep Wrangler
...turn the headlights back off. I can turn the headlights back on and same sequence of events occurs, dim dashboard lights and after about 5 minutes of driving the sound comes back until I turn the ...
...goes on and off Hi There,Thanks for the question,I had a similar problem with the headlights turning on and off.What you need to do is just check the earthing inside the bonnet , usually
...turn the headlights on and off and even a little with the brake pedal. With larger fuse in it the headlight switch turns the radio off when you turn the headlights on and turns it on when the ...
on hit dimmer switch and headlights turn off whats the fix alot of vehicles have a seperate fuse and/or relay for the high and low beams. if you can't find a problem there it could be the swich itself
...headlights wont turn on. all other light work fine. the fuse is also fine Try a couple things if you haven't tried already. First try replacing the bulbs (sometimes the most obvious answer is the ...
...turn signals, headlights come on with key will not work with headlight switch, cannot go to brights on headlights 2008 should be under warranty, take it back to dealer. With all of the electronics on ...
Question about Jeep Wrangler
...headlights on and blew fuse immediatly disconnect head lights, and replace fuse. Then turn the light back on to see if it blow a fuse again. if not, plug on light in at a time. You might have a bad ...
...headlights and taillights went out .Brake lights will not work also. The gauges still light up and the turn signal and high beam indicator stay on. I have check the switch , could it be in the multi ...
Question about Jeep Wrangler
...10 min. the headlights go out. only the headlights. then i turn the swithch back off and on and they come back on, but go out again More then likely the multi-functional turn sig. switch is going
480 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions