1990 Jeep Wrangler "drain plug top mount refrigerator" Questions

Ad

drain the coolant into a sealable container. Coolant should be reused unless it is contaminated or several years old. Disconnect the hoses at the thermostat housing. Remove the air cleaner. Remove the

Ad

...Drain the cooling system by removing the plugs under the radiator and then the engine block, draining the coolant into a clean container. Disconnect the negative battery cable.2Disconnect the heater ...

Ad

Question about Jeep Wrangler

1 Answer

...Drain engine coolant and plug lines. Refer to: "Engine, Cooling and Exhaust : Cooling System : Service and Repair" See: Engine, Cooling and Exhaust\Cooling System\Service and Repair Remove instrument ...

Question about Jeep Wrangler

1 Answer

...drain plug on the bottom of the radiator, and let the engine coolant drain into a resealable container. Then unplug the electrical connectors from the coolant fan and thermal switch. **Then carefully ...

Question about Jeep Wrangler

1 Answer

...drain plug. Drain and properly contain engine coolant. NOTE: To open the drain plug on models equipped with a 2.5L engine, use a 3⁄8 inch drive extension 3 inches (7.6cm) long and a 19mm ...

Question about Jeep Wrangler

1 Answer

drain plug and install a new oil filter. Install the oil pump pick-up tube and oil pan. Install the transaxle inspection cover, if removed. Fill the crankcase with clean engine oil to the proper level

Question about Jeep Wrangler

1 Answer

...drain fitting at the bottom of the radiator and the cap on the reservoir and letting the coolant pour into a large container. Disconnect the battery's negative cable, loosening the cable clamp nut ...

Question about Jeep Wrangler

1 Answer

...Drain the cooling system into a clean container for reuse. Remove the instrument panel by performing the following procedure: Turn the steering wheel in the straight-ahead position. Remove the ...

Question about Jeep Wrangler

1 Answer

...Drain and recycle the engine oil. Disconnect and plug the transaxle cooler lines at the transaxle. Secure the lines to the radiator. Disconnect the heated oxygen sensor wiring harness. Do not allow ...

...Drain the cooling system into a clean container for reuse. Place shop cloths in the interior to catch any excess coolant. Remove or disconnect the following: WARNING The air conditioning lubricant ...

Not finding what you are looking for?
1990 Jeep Wrangler Logo

480 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...