2003 Chrysler Town & Country "speed control resistors" Questions

control blower only works on high speed. 2002 Chysler town & country - Front climate control blower only works on high speed, is it in the switch or in the five speed blower motor? Or in something

...SPEED SETTING GROUND IS CONTROLLED BY THE RESISTER PACK FROM THE CONTROLS. TO TEST IF THE THERMAL FUSE HAS FAILED. TO SEE IF THE BLOWER MOTOR IS GOOD AND THE RESISTER ASSEMBLE HAS FAILED RUN A GROUND ...

...heater blower won't shut off. It stays on at a medium speed when the controls are on but goes to full speed when the heater controls are turned OFF replace the blower motor speed control

...control will longer change speeds as it runs at a fast speed only. Most of the time this is a bad "blower motor resistor". It is easy to replace. You will find your behind the glove box in the ...

...resistor? its for a 2002 chrystler town and country. Thanks Blower motor is bad. Resistor controls speed. Motor is so worn out that it will only turn when set on high. Best to replace it before it ...

speed control issue Sounds like you have a faulty fan motor resistor that has a bad connection or it is faulty.Wiggle the connector going to the resistor with the ignition and fan switches on.Location

...control. After work one day, the blower just took over and runs full speed. If you turn OFF the power button, the re-circulation mode comes on. The temp controls work ok. The Rear system is OK. I'll ...

...speed (maybe even higher than your normal high setting). On most newer vehicles, including your '02 T&C, to help keep the resistors cool, they are mounted to a heatsink and then that assembly is ...

speed control switch is in. The only way to turn the blower fan off is to pull the fuse or turn the ignition off. I had a similar problem about six months ago and resolved the problem by replacing the

resistor to fail over the motor which only has one speed. The resistor lowers the voltage to slow the blower motor for its speed control. You can use a volt/ohm meter to test the resistance or voltage