2003 Chrysler Town & Country "remove key stuck ignition 03" Questions

...remove the key. ---------- Spray wd-40 in the ignition key hole and let it remain there for few minutes,after that once again try to remove the key and see if that helps. --------- But if that is not ...

...plug/hole use a thin screwdriver to push release and turn key off and remove then charge battery --also the shiftier cover sometimes [is a known problem] gets caught and wont let shiftier go into ...

remove the key. ---------- Spray wd-40 in the ignition key hole and let it remain there for few minutes, after that once again try to remove the key and see if that helps. --------- But if that is not

...remove key. You should now be able to start vehicle. To program the spare use the already programed key and turn it to the on possition (dont start) then off. remove key and insert spare and turn to ...

...key out, but I also can't turn the car off. Have to remove one of the battery cables to stop the engine from running. Tried just about everything I can think of or find to solve this with no luck so ...

...stuck,your anti theft device is activated,you need to lock and unlock your doors a couple times with the key fob,not the key,and then you need to put the key in the ignition and start it,if you dont ...

...key it just clicks but not ignition. All the accesories are working so what could be the problem? YOUR STARTER MIGHT NEED TO BE REPLACED. BEAT IT WITH A HAMMER NEXT TIME AND HOPEFULLY IT WILL START. ...

stuck-in-park.html --------- Car will not come out of Park? http://howtobyme.blogspot.com/2011/11/car-will-not-come-out-of-park.html ----------- Automatic transmission will not go into high gear? http

...key is on the ignition and wait 5 minutes for the ECM to initialise. Did you use OEM MAF and Throttle Body. Cheap MAF are notorious for being faulty new. Make sure the connectors are good and tight ...