2003 Chrysler Town & Country "hard shift" Questions

...hard down shift when slowing for a turn or stop. If I position it to '3' the hard down shift does not occur when slowing. What could be causing this? Low fluid, worn transmission parts, need new ...

...hard and it sometimes wont shift at all, reveving the engine going but making the engine work really hard. If I stop the car, turn it off, restart it, it usually will shift fine. The car place said ...

...hard acceleration pulls to the right after shift and rpm's drop off have a 2006 chrysler town and country new struts,tires,cv shafts,lower control arms, sway bar end links ,front end alignment can't ...

...hesitating before shifting into 2nd gear (30-35mph) when going into 2nd, it is a hard shift Lucas transmission additive helps free up sticky valves and renews seals Costs about 10 bucks. worth

...hard or wont shift at all. Do I need to get a new tranny or could it be something simple? The trans needs a new pump and torque converter. Check the transmission oil level. That sometimes causes a ...

...out of OverDrive, it is briefly in nuetral causing the van to seem to jump forward, then it shifts hard into a lower gear. I have found that keeping the van in "3" instead of "D" prevents the hard ...

shift back to Park and then to Drive. If your van has alot of miles, then just ignore it. Get a sevice done on it and let it warm up a bit and see if that helps the problem. When the miles get put on,

transmission is shifting hard. Does it feel like the motor is jumping when it shifts? Check to see if you have a bad motor mount. Jack your car up and put on jack stands. Place a floor jack under the ...

shifting hard bogs out when pushing on gas How do you know this is a trqnsmission problem? Sounds more like a loss of power.