2002 Chrysler Town & Country "blower speed control switch" Questions

...blower fan automatically increases speed, selector speed control switch has no effect. Removed front relay fuse in engine compartment, blower fan went off? What do i need to do to fix this? does it ...

...SPEED BLOWER CICET IS PART OF THE RESISTER ASSEMBLY. IN THE RESISTER ASSEMBLE THERE IS A THERMAL FUSE THAT IS IN THE HIGH SPEED BLOWER CIRCUIT IF THIS THERMAL FUSE GOES YOU LOSE HIGH SPEED. ...

...speed blower motor? Or in something that I am not thinking of? Can you help me? Replace your blower motor resistor Resistor located under dash on passenger side in screwed into blower housing. May be ...

speed control switch is in. The only way to turn the blower fan off is to pull the fuse or turn the ignition off. I had a similar problem about six months ago and resolved the problem by replacing the

...power module behind the glovebox, but I am finding mixed signals. Before I buy something to test the current I thought I'd check here. I would replace the blower motor speed control

heat only works on high HEATER BLOWER WORKS ONLY ON HIGH SPEED.PROBLEM COULD BE FAULTY BLOWER RESISTOR OR BAD AC AND HEATER CONTROL SWITCH.

...speed then chance is that the blower motor it self is brunt out .test four power & ground at the motor. Either the switch is broke or the blower motor is. My guess would be the blower motor. You ...

resistor to fail over the motor which only has one speed. The resistor lowers the voltage to slow the blower motor for its speed control. You can use a volt/ohm meter to test the resistance or voltage

...blower is inop in all speed functions and the control unit has its power, ie lights and appears to be working, then the connector to the blower motor is probally melted and causing a bad connection. ...

...blower motor checked that it works fine, next i checked the control panel and that still didnt fix it, i also pulled the resistor and looked at it it looks brand new havent tried a different one ...