2001 Chrysler Town & Country "wiper turn signal low beam" Questions

Ad

low beam will not switch. also right side turn signal blinks on left side try asking about replacing the multi-function switch...generally controls the headlt.dimming,turn signals,wiper speeds. kev-mn

Ad

Question about Chrysler Town & Country

1 Answer

...Audi A6? first noticed cruise control-then, suddenly low beams and wipers started intermittently going out- then all stopped working, along with blinkers-altogether. Are they all on the turn signal ...

Ad

Question about Chrysler Town & Country

2 Answers

turn signal stalk on my 2002 Lincoln LS to switch to high beams. The high beams came on but I couldn't switch back to low beams. The high beam blue indicator stays on on the dash. Had to pull the high

turn-signal noise. check your charging system the voltage at the battery should be 12.85 Volts WITHOUT the engine running and 13.2-14.5 Volts with the engine RUNNING. If the voltage is low it probably

Question about Chrysler Town & Country

1 Answer

...turn signal problem I bought a used 2001 Pontiac Firebird recently. The turn signals does not work, the emergency flashers works though. I also noticed that the high beams does not work either. When ...

Question about Ford Cars & Trucks

1 Answer

no low beams Check to see if the wipers work or blinkers also, if not bad turn signal lever on the column. Also check main light fuse for low beam under hood. Swap relays in fuse box to test further.

Question about Chrysler Town & Country

1 Answer

...wiper come on. I replaced the turn signal with no change. Could it be the wiper motor/module? chances are! these are very problimatic and gm had an updated module for these wipers. i say that not ...

Question about Chrysler Town & Country

1 Answer

...any help? I suspect a bad multi function switch located in the left hand side of the steering column. This switch controls your high/low beams/wiper delay/windshield washer/turn signals and

...turn signals, hazards, or low beam headlights. What to look for next? When you had the wiring loose for multifunction switch, if possible, knowing what color wire did what, using wiring diagram, I ...

Question about Chrysler Town & Country

1 Answer

whenlow beams are on and i put the high beams on, both low and high go out. i replaced the multi funtion sw., the bulbs and relays. help. It all works through the turn signal, wiper switch

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

1,898 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...