2001 Chrysler Town & Country "side doors opens" Questions

Can't describe this a bit more. "if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel" Driver side sliding door ...

...side doors or back hatch. We must now use the key to open the back hatch.... Thanks for you help! JH Did these doors quit at the same time or over a period. It seems that the actuators for the locks ...

...SIDE AUTOMATIC DOOR OPENS JUST A FOOT THEN STOPS. HAVE TO OPEN MANUALY REST OF THE WAY. There is a tsb out for problem with power sliding doors check with you dealer. Tsb technical service bulliten a ...

...overhead switch there is no audible pinging to warn of door opening or lock or motor noise. other side door and tailgate all power open and closed normally check you're sliding door harness this is ...

...side sliding door? There is no "switch". The Sliding Doors should be manual anytime you try to open or close them. If not: then there is problem in the electronic system or the physical/mechanical ...

...work. Can this be fixed easily? There is a switch or sensor on the door frame either on the hinch side or on the latch side. Try to activate it with the the car on. With the door open, the door

...doors. Batteries have been changed, and still nothing (second remote that came with van was lost and never found, so we only have the one). On occasion (and starting to happen more regularly) the van ...

passenger side power door does not open electrically door does not open using remote or on-board pushbutton Fuse, or switch in door not completing, does the door close? if so, prob switch.

...side doors and the hatch should have button switches located in the front door jam of the front doors and one for the rear hatch. Somtimes you will find more then one button. 2 Close all doors 3 Open ...

...doors and my drivers side rear door is locked open and I can't close it. The motor sounds fine when I press the buttons but it's like it's stuck on something at the bottom check the closing mechanism ...