2001 Chrysler Town & Country "liftgate button working" Questions

...liftgate; manual switches on inside of front doors will not lock or unlock the doors. What does work - the horn honks when the ''lock'' button on the remote transmitter is pressed. (The transmitter ...

...go to the dealer and have them check the codes. The factory has a reflash for the sliding door and liftgate modules for this type of problem the codes it might have for this is INCOMPLETE POWER OPEN

...button on the keyless entry transmitter 3. lock the driver door , passenger door, or liftgate using the key in the key cylinder After the last door is closed , or if all the doors are closed the ...

...button in the glove box - still won't close How to Use the Power Liftgate on 2013 Toyota RAV4 www.autoevolution.com/.../how-to-use-the-power-liftgate-on-2013-toyo... Nov 13, 2013 - First, there is no ...

...I can't unlock it with the Unlock button of the remote but the Liftgate button does work. The Unlock button used to unlock all the doors and the liftgate, now it only unlocks the doors.

...button doesn't work either. Is there a fuse or relay? If so where is it? An electronic control module controls it . The liftgate module (LGM) controls operation of the liftgate latch motor and the ...

...liftgate button if its properly working by listening to a clacking sound if not then the solinoid is not functioning or check the liftgate hydraulic retainer (shock absorber like) if its pushing or ...

...liftgate, push the button on the instrument panel , press on your five-button key fob (if equipped), or press and release the control located in the left rear quarter panel (Figure B). To unlatch the ...

...liftgate button or close with the button on the top of the liftgate. Could it be the fuse? which fuse controls the liftgate? The most likely problem is the lift gate motor is defective. there is a ...

...liftgate, press the off button to disable the power liftgate function, so that you can open the liftgate manually. With a little help from you, extend the liftgate at full open position and check if ...