1999 Mercury Villager "turn car security" Questions

Ad

Question about Mercury Villager

1 Answer

car wont turn over Make sure the shift lever is working properly. If the lever is sloppy and loose it is not engaging the proper gear for starting (P or N). If this is the case a bolt is loose or ...

Ad

Question about Mercury Villager

1 Answer

...turn the ignition enough so I can push on the pin on the underside and take the ignition lock out, to take it to the lock smith to have a key made instead of having to pay a high trip charge? even if ...

Ad

upper intake plenum manifold removal,,,got everything I could see,,,is there a bracket or something behind motor by the firewall,,,it stillseems to be on somehow?? The plenum very well could have a ...

Question about Mercury Villager

1 Answer

...SECURITY indicator light electrical connector. Disconnect the speed control on/off (CRUISE CONT. ON/OFF) switch electrical connector. Disconnect the headlamp switch electrical connector. Disconnect ...

...and the battery. I wondered at first if it was a timer thing, because it used to only happen when I turned on the lights in a lit source, but now thinking different because the problem seems to also ...

Question about Mercury Villager

2 Answers

...inner and outer alternator to bracket mounting bolts. Loosen the alternator adjustment lock bolt. Turn the alternator adjustment bolt counterclockwise to loosen the belt. Remove the belt from the ...

...turn over. Car Won't Start Because of Anti-Theft System ... - RepairPal repairpal.com > Problems > Pontiac > Bonneville Replaced trans, engine, PCM and bcm, now starter diabled- theft flashes on ...

Question about Mercury Villager

3 Answers

...car, turn the key to start, when it don't start let key come back to run (do not turn off) The security light should be blinking, let car set for about ten minutes or until security light stays on ...

Question about Mercury Villager

3 Answers

...turn the key on the start area but dont try and start it. the security light will flash for about 10 minutes then when it stops flashing turn the car off then turn try and crank it. it should

Question about Mercury Villager

1 Answer

...TURN OFF IGNITION SWITCH.WAIT 5 SECONDS THEN TRY CRANKING CAR.IF THIS DONT WORK TRY ANOTHER KEY DO THE 10 MINUTES SWITCH TRICK.IF STILL THE SECURITY LIGHT DONT TURN OFF YOUR THEFT SECURITY SYSTEM IN ...

Not finding what you are looking for?
1999 Mercury Villager Logo

569 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...