Through the back seat! Easy to do. Remove seat base by pushing back on the seat. Or, 2 bolts may hold it in place. Remove a black rubber grommet/cover, about 6 inches in diameter, and there it will be
back, and remove the lower anchor bolt (B). Remove the B-pillar lower trim panel. Remove the upper anchor cover (A), and remove the upper anchor bolt (B). Disconnect the seat belt tensioner connector
...remove the wire plugs on the back, be careful not to damage the wires. With the cluster removed there is a white box on the back that needs a small flat blade to remove. Once removed the small lamps ...
...seat belt had retracted properly. Hope this is of some help. bikerbc - Excellent advice! You were spot on with my Honda CRV problem! My battery kept going dead because I would leave the lights on ...
Question about Honda Cars & Trucks
...back. Remove the front 2 bolts. Tilt the seat back and unclip the wire on the underside of the seat. The seat should lift out. Refitting is the reverse of this method. **Note** You might need to plug ...
...seat belt had retracted properly. Hope this is of some help." Regards, bikerbc On the pillar drivers side there is a switch. unscrew the switch. (On the bottom covered in rubber is the screw). The ...
Question about Honda CR-V
...remove the rear seat head rests for installation of seat covers on my 2015 Honda CRV. The outer two seem like they can come off, but the small button does not release them. The middle headrest is ...
696 questions posted
Usually answered in minutes!
547 Questions
400 Questions
370 Questions
337 Questions
314 Questions