...steering wheel, the volume up button changes the station while the volume down button turns up the volume there is a service bulletin about this. the steering wheel has to be removed along with the ...
...remove just the buttons from the steering wheel w/o interfereing with the airbag? I wouldn't recommend it because then you will have empty holes in your steering wheel. Plus if you do take them out ...
...Remove the steering column upper and lower covers. Disconnect the dashboard wire harness connector (4 pins) from the cable reel. Check for continuity between the cable reel no.2 terminal (light ...
...steering wheel to the left. Use a flat-tipped screwdriver to remove the holding clip from the inner fender, and pull the inner fender cover back. Remove the socket from the headlight assembly by ...
Question about Honda Odyssey
...Remove the inner steering rod ball socket nut from the inner steering rack shaft.To install:1) Inspect the tie rod end for looseness, and the steering rack boot and tie rod end boot for cracks ...
Question about Honda Odyssey
...remove the old fluid from the PS reservoir and replaced it with Honda/Acura power steering fluid. Please note that you must use only the Honda/Acura fluid which you can get from parts stores or the ...
how to remove ignition have to remove steering wheel
how to remove right camshaft sprocket How to remove right camshaft sprocket? You need to get a sprocket puller. It looks similar to a steering wheel puller.
steering column. 2. Remove the panel that encloses the instrument cluster. 3. Replace the light bulb located on the back of the panel (removed in step 2). 4. Reinstall the instrument panel (removed in
steering column under the dash... like within 12". It looks a lot like a smaller version of the Centronics connector (if you remember that), a little like a D-sub connector. Note that it MAY be hidden
765 questions posted
Usually answered in minutes!
578 Questions
521 Questions
449 Questions
472 Questions
429 Questions
