2002 Honda Odyssey "accord bumper replacement" Questions

2002 honda oddessey: how do you replace the passenger headlight assembley Yes, it is very involved. According to the Haynes manual you will have to first remove the radiator cover, the radiator grill,

...replacement part. There are many stories in our forums where folks replaced the cat with a cheaper aftermarket one only to have the code return shortly thereafter.One thing to note is that many ...

...what is the better way to replace the Front bumper of my 2008 Honda accord. Can i order bumper frame from ebay? please advice Yes go onto ebay and get a new bumper. I have ordered alot off of ...

accord I need to lower bumper so I ca n remove defective assembly. Where are the bolts to drop bumper on that side? the bolts are at the fender and bumper edge from the corner feel the underside its a

...bumper of 2000 Honda Accord Coupe Trying to replace head lights but have to remove bumper first. Can't find good instructions. i think there just bulbs unless u have damage and your replacing .i have ...

...bumper cover on a 91 honda accord? I need to remove and replace both headlight assembly. Its easy look at the bottom of the bumper has retainers and the fenders have a bolt on each side then just ...

Accord. You have to partially remove the bumper to get to 2 of the 10mm-head flange bolts. The bumper is held on by 4 bolts, accessible through the turn signal hole in the bumper the turn signal light

...Accord V6 Front Bumper - cost i happen to hit a big ice mass that was on road while driving. My front bumper got cracked on one side that it looks so awkward. how much does it takes to replace it? i ...

...accord and need to replace both headlight assemblies. It looks like there are just 2 bolts under the hood on the top, one on each side off the tire well and three on the bottom to remove the bumper, ...

...Accord and remove the right front tire. Then take off the front bumper (don't worry, it's not the old type that weighed a ton; this is essentially just the plastic cover). There are bolts on either ...