2002 Honda CR-V "rusted shift cable" Questions

...rusted. Can this be the only problem? When driving the car, when pressing the gas, the car does not move ( RPM go high, but car not accelerating).THis usually happens at low speeds ( when first ...

...shift past 3rd gear. I'm trying to find out things such as what parts need to be replaced, if I can get away with cheaper parts or if I should really go with OEM, how difficult of an undertaking it ...

automatic transmission shifts down on its own the kick down cable must have slack, at idle. if not its bad. (end to end, something is wrong with it) this cable is for passing gear. you jam the ...

...shift process is through a cable then check the cable for wear and fraying, rust or dry. If it is through linkage check for worn /rusted /tight connections Try removing the plastic cover below the ...

...shift and drive. last decade or? i guess the box is rusted up solid. NO to park is usually a free trip but park to any other gear is blocked if brake lamps are dead. called park lock out. at side of ...

...shift cable.if possible heat nut on cable and move cable out of way and carefully pry between shift arm,put brake fluid on and work lever till it feels easy then work other end and put back together. ...

my shift cable is too tight how do i go about loosening it? i have a 02 neon 5 speed shift cable sounds like it is rusting and needs replaced.

...rusted through and that the parts above it have dropped into the frame. What is causing the shift to be hard to move? If you don't believe the shop take it to another one. If they tell you the same ...

My 2005 nissan altima shifter wont move up past reverse. it will shift into 1,2,3,d, and n then stop shifting. i cannot get it to park. Shift cable needs adjusting or replacement if rusted.

...shift cable stuck in drive in a 2000 sebring cable is stuck in drive- will not move Locate the cable on the transmission and see if it is still attached to the shift linkage. If it is, see if you can ...