2002 Honda Civic "remove alert battery" Questions

...battery terminal and replacing it after a couple minutes you are resetting the computer and you can get another alert that tells you exactly what the problem was prior to the required alert coming on ...

...Alert port • Recharging the battery immediately to bring it to the capacity of 10% or more • Pressing the battery indicator display button. If the alarm is turned off by pressing the battery display ...

...Alert', if it persists then it's likely the lead acid battery is dead (lost a cell.) Remove the battery, use a voltmeter and if it's less than 12V after charging, you've likely lost a cell (fully ...

...What's the problem? When the battery is removed it sets a security alert code. You should have a code in manual to reset the audio security issue. If no code call local dealer and have VIN #

...alert and battery light turns on. Hi. My 2006 Ford Five Hundred starts ok, but I can't turn the steering wheel. It feels locked or the power steering isn't working. Immediately the check system alert ...

...alert. I suggest you remove, recharge and test the battery and replace it if it doesn't test good. It is advisable to refit the battery with the car door open, the key in the ignition and switched

...Remove a battery cable for one minute, then re-attach it. This should clear any codes in the car, take it for an easy short drive. If things are better and then get worse as you drive you're problem ...

...alert? The Engine have been soaked and everything electrical has been soaked, causing disrupting in electrical circuitry(ies). Make sure all the liquid has been removed from around any electrical, ...

...remove stock CD player. will this interrupt any of my service alerts or my ABS system? (anti-lock break system) or traction control Many DIY'S like your self come unstuck when fitting after market ...

...battery. If there is a connection remove the big wire from the solenoid that goes to the starter. If this breaks the connection the starter is bad, if the connection is still there you need to pull ...