...waterpump on 2000 honda accord se 4cyl i cannot remove bottom pulley bolt so that i can remove dust cover to get to the water pump.IS the bolt a left hand thread and if not do i need a special tool. ...
waterpump bolts. Its tight but it will squeeze out. If it is a V6 !!! engine then obtain a standard power steering pump pulley puller and large drain pan or a couple of large rectanglar cake pans (not
Waterpump belt part # is F5RZ-8620-A, aka JK3-274 Remove the engine/pump belt plastic cover and battery. Push the belt tensioner in till it hits the cam pulley and remove the drive belt. The tensioner
waterpump is not soft, causing it to collapse, restricting coolant flow when engine revs are running above idle. I had a similar problem some years ago with a 350 chev motor- I too had installed 2 new
1,507 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions