2000 Honda Accord "remove back spring" Questions

Ad

...Remove brake shoe assembly from back plate. Disconnect parking brake cable from lever and remove brake shoe. Remove parking brake lever from brake shoe. To Install: Install parking brake lever to ...

Ad

Question about Honda Accord

1 Answer

...remove the struts from the car. Place the struts on a compression tower to relief pressure from spring. Once spring is compressed take of the top bolt on the strut which holds on the strut mount. ...

Ad

Question about Honda Accord

1 Answer

back to its place to remove the pocket remove the trim around the gear lever remove the cion holder and acc. socket raise the cion holder liner there is two screws undrneath the lner once you get this

back of tire),jack car on the jack pad in front of the tire your going to change the spring.Remove the bottom shock bolt,this will allow the control arm to drop enough to pull out your old spring.Some

...back of the brake drum housing ( 9mm nut) and remove the horseshoe clip and push the curved metal brake line through the small hole where the line is anchored to the strut. Use care as you will need ...

Remove the front wheels. Work on one at a time, using the assembled brake for reference as you do the other one. Make sure your disc is okay, and that you just need pads. Push the piston back into the

Question about Honda Accord

1 Answer

...is grooved inside it may catch on the shoes (liners).If there is access from the rear (which I doubt) back off the adjustment, if not it may mean damaging the springs and clips to remove. Regards ...

...the clips and then pull handle. repeat untill door opens, then take door apart, remove latch and oil till all clips and spring move freely. Now put it all back together and it should work

Question about Honda Accord

1 Answer

...remove my serpentine belt Look at the front of the tenisinorthere should be a squre slot in it use a 3/8ths extention for a 3/8ths scoket wrerch with no socket the end of the extion should fit into ...

...remove strut, then use spring compreesor to disassemble. Removing strut is difficult because of clearance problem at bottom with knuckle/hub assembly. I had to use spring compressor while strut was ...

Not finding what you are looking for?
2000 Honda Accord Logo

1,507 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...