2000 Honda Accord "change wheel hub assembly" Questions

Ad

Question about Honda Accord

1 Answer

...bolts. Slide the wheel back in place on the studs and tighten down the lug nuts in a star pattern. Lower the car off of the jack stands or move on to change the other side's wheel bearings as

Ad

change the rear wheel bearings The rear hub and bearing are combined into a single assembly. The bearing is sealed for life and requires no lubrication or attention. If the bearing is worn or damaged,

Ad

...wheel assembly not meant with a car for rear abs since my abs is already turned off or not working? Will it bring further damage to my car other than having no rear abs? It won't make any difference, ...

...hub. Then the wheel bearing needs to be pressed out of the hub. I usually have a machine shop do this for me. This is just a basic overview of the process, but wanted to let you know what you are in ...

Question about Honda Accord

2 Answers

...wheel bearing and hub unit are replaced as a unit. With the vehicle on the ground, loosen the spindle nut. Raise the vehicle and support it safely. Remove the rear wheels. Remove the brake disc ...

...hub assembly so it depends on your situation.To replace a bearing, you have to remove the wheel and brakes, then disconnect the spindle and the axle shaft.Not something a DIY can do in a driveway ...

...change new rotors and pads. Drove 50 miles and the front drive axle where it goes into the front wheel looks and acts like it is stripped out. It's making bad noise if you try and drive. Could it be ...

Question about Honda Accord

1 Answer

...change cvc joints 1997 accord replace the entire CV axles. Support vehicle with jackstands by frame. Remove front wheels. Remove axle nuts. Remove lower balljoint nut. Separate balljoint from nuckle ...

change the front passenger side wheel bearing assembly on 1991 honda accord exr There are 4 bolts on the back of the knuckel holding the wheel bearing in. The hub is pressed into the wheel bearing, so

Question about Honda Accord

1 Answer

...change the front wheel bearings on my Honda? I tried to do it before, but the whole axle assy seemed to want to come apart! is this normal? Any help will be appreciated. Yes. the whole axle assembly ...

Not finding what you are looking for?
2000 Honda Accord Logo

1,507 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...