2000 Honda Accord "car tape code" Questions

...car broke down causing the clock and tape deck to die and needing to be reset. i reset the clock, but the tapedeck is asking for a security code, and i dont know it, can you give me that info please. ...

tape). One is a three wire connector (data link connector) the other is a two wire connector. By jumping the two wires on this connector, you check for engine and transmission codes. With the ignition

car tape showing code It is asking for the radio code. If you don't have it then you need the mod or the serial no. off the top of the radio and call a honda dealer.

...code). The repair manual says it is behind a panel on the passenger side in front of the door but it is not there. It is a small, long blue plug with two wires, located above the passengers side kick ...

car tape is asking for the code and i do not have the manual phone your local honda dealer.generally the radio codes are stored in a central data base,usually located by either vehicle plate number or

93-honda accord code jumper wires where are the wires for code troubleshooting It's a two prong blue plug, located inside(slightly above) the passenger's side kick panel. It should be taped to

...auto ask to use hand computer hook up to car with ingnition on will give codes look in manual in store for code to get answer . if it works leave well alone and stick a bit of black tape over the ...

...tape player and I got a new battery and now all that pops up is "code" I took the stereo out and I'm looking at it right now???? you have reset the security code on the stero if you have the owners ...

...tape for use of the factory installer/QA Inspector. If still in the car, it would be in the general area of the glove compartment; inside, on the wall, on the inside lid/cover, underneath. Of course ...

...Now my Dolby audio cassette tape player won't work it will only display the word code on the screen. go to your honda dealer for the code,they are the only ones with it,write it down when you get ...