1998 Honda Accord "tell master cylinder good" Questions

Ad

Question about Honda Accord

2 Answers

...tell me why you replaced the master,but i would say the slave needs replaced.the reason the fluid is not bleeding is because the fluid is not getting past the seals in the slave, ie slave cyclinder ...

Ad

tell the store IF FULL Most Probably MASTER-- If EMPTY then See where it went Look At SLAVE if wet thats the Culpret. --->> I Hope this INFO helps you and have a good Day >> Please dont forget to RATE

Ad

...Tell me i don't need a new clutch! the gears are sticking? is the shifter just really tight and hard to move from one gear to the next, or even just wiggle around in neutral? if so, you may need new ...

...tell when your clutch master cylinder is dying or needs repair when you depress your clutch pedal and it slowly sinks to the floor and does not return. Since the entire system is a hydraulic one, the ...

...bottom of the bellhousing to see if fluid has been coming out of it. That will tell you if it's the master or slave cylinder. Most likely it is the slave leaking inside the transmission

master cylinders had traction or not based on the model, year and engine type. Input that information into the search tool at AutoPartsWarehouse dot com (or any parts site, really,) and it'll tell

...way to tell is if the rubber seal in the master cylinder cap is swelling up. Flushing the system for other than contaimination is a good idea to keep your brake system operating more ...

Question about Honda Accord

3 Answers

...master cylinder has an adjustable pushrod, it is set up too long now. Take it back to where it was done and tell them if they don't know how to set up clutch free play, they shouldn't have attempted ...

Question about Honda Accord

4 Answers

Master cyc. and the brake booster. I made sure the two units were tight but to no avail. Can you tell me what is causing this? Thank You There is Supposed to be a Gasket Between the Booster and Master

Question about Honda Accord

2 Answers

tell is to line lock all four wheels, and see what your pedal feels like. If it is still low, you have a master cylinder problem. If not, you need to take the locks off one at a time till you find out

Not finding what you are looking for?
1998 Honda Accord Logo

2,296 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1994 Honda Accord
1994 Honda Accord

1,470 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...