1998 Honda Accord "rubbing harmonic balancer" Questions

...rubbing. She also reported smelling smoke or something burning. No warning lights. I'm visiting for a few days but will have to return home. Your help is most appreciated! you might check the ...

...harmonic balancer from rubbing the timing cover? There was a key inside the shaft in the harmonic balancer was put on the key was not set right, and it was pushed back into the sprocket on the ...

...harmonic was rubbing on the timing chain cover. It wore into it about 1/4 inch. I checked the crank shaft for play but it was well in the specs for movment i was wonderin what could cuase this The ...

harmonic balancer is rubbing the car frame first point to check is the engine mounts if they are at the bottom of the insulator , that will be allowing the pulley to touch the frame replace all engine

...harmonic balancer go bad on a 1983 chevy silverado 305 v-8? it can go bad from the seal in the timing chain cover rubbing the outer diameter of the balancer shaft and causing a deep groove,or it has ...

crank pully rubbing on front of motor Probably worn out. Harmonic balancer rubbers worn.

...Any ideas? Check the crankshaft position sensor.It is located forward of the harmonic balancer.Quite often the bracket that holds it gets broke or loosens up allowing sensor to rub on

...harmonic balance is bad according to a autozone person it moves when the car is on and he told me it needs to be replaced because it has play i need to replace and find out were to buy that peace it ...

...harmonic balancer touches the tool, replace the balancer assembly. NOTE: A clearance of 0.025 in. (0.635mm) is required on either side of the interrupter ring. Be certain to obtain the correct ...

...harmonic balancer touches the tool, replace the balancer assembly. NOTE: A clearance of 0.025 in. (0.635mm) is required on either side of the interrupter ring. Be certain to obtain the correct ...