1998 Honda Accord "fixing broken car seat arm" Questions

...broken Its uncommon for honda to have problems with the gas gauge unit but is possible, the first thing is to check all the fuses, this may have a bad sending unit which is located inside the fuel ...

...seat broken-the support metal arm-2004 Grand Cher Drivers Power seat broken - the support metal arm that attaches to the base cracked/broke. How can I repair? How easy is it to remove the seat and ...

broken reclining seat back Nearly all reclining seats are dependant on a leaver with a pin that interacts with a toothed edge. While all are slightly diggerent it all boils down to either the arm with

arm is broken it diverts the heat to both sides of the compartment. I had a quick free fix from my dealer from them by setting my temp to HI on both sides. But that did not fix the original problem of

...broken shocks, loose wheel bearings, problem could be in the rear tires and felt through the seat. if shimmy is while braking , your rotors will need surfacing or replacing. Not a lot of info was ...

seat works fine but the left one doesnt work at all, any clye why could this be or a way to fix it? Try this test. With the key OUT of the ignition stand outside the vehicle, reach out and try to move

...broken completely off, rendering the rear shade inoperable. I took it to the BMW dealership to have it looked at and they told me that it would cost about $1200.00 to fix it. Is there a temporary ...

...arm that attaches it to the wiper motor is broken or has detached. If this is the case you won't be able to fix it yourself. Almost certainly the wiper arm is attached to its spindle with a nut. ...

...seat to get better access to some,then remove the panel and reach into the inner door and move the unlock arm to open the door.you move have clips that are broken that allowed the arms to come off ...

...broken. How do we get at it? Is it necessary to take out back seat, side panels, etc.? you will need to remove just two parts well maybe three. the door trim there are a couple of hidden screws that ...