1996 Honda Civic "pcv elbow" Questions

...PCV valve. It is a little elbow with a clamp and may be covered in oil. Your patience and dexterity will be tried, however you can replace it yourself. Please let me know if I may assist further. PCV ...

...PCV valve Kinda hidden underneath the intake manifold. Looks like a little plastic elbow, stuck in a rubber grommet on that box. The hose goes to the intake manifold, not to the air intake pipe. You ...

...PCV elbow, I followed the line and found that other connection which was worse than the PCV elbow. The whole piece (PCV elbow 12" plastic line and piece connecting to throttle body) was a $30 ...

elbow to the PCV tube 7) Push the new PCV valve back down into the large rubber tube My 03 Ford Focus LX would sometiomes down shift to 2nd while going down the road. Any solutions or something I need

. Guru......saailer Should sit next to the oil fill cap on valve cover, remove hose and 90 deg. elbow from top of pcv valve, elbow will come off, with a 24mm socket or wrench unscrew from valave cover

how much hose do i need to replace my pcv valve hose on 3.1 actually u can use just the elbow of a spark plug wire to replace the cracked elbow on the pcv valve,hope this helps

PCV valve is either the elbow or the piece in front of the valve cover after the elbow. If it has one, it will be between the valve cover and the air intake. It is next to valve cover. It is an inline

...PCV elbow problem.. Around 100K miles 5.4's are bad to rot out the PCV elbow on the back of the throttle body, this will cause bad idling problems and will throw lean codes when it gets really bad. ...

...and P0174 running lean on banks 1 & 2. The most common problem is what the first answer mentioned, a hole in the PCV elbow, or a dirty or inoperable MAF sensor. On my car it was the PCV

...pcv lines on 2002 freelander? one is larger t on top of engine and smaller elbow attaches to air flow sensor. I also need the red end that fastens the teleflex hose to engine. Thanks, Mike Try Rovers ...