1994 Honda Civic "need remove front wheel hub" Questions

Ad

...doesnt want to come off. is there anything else i need to do to be able to remove the hub? the whole spindle needs to come off unless you have the correct pullers here is a diagram have a good day ...

Ad

Question about Honda Civic

1 Answer

...front hub carrier,remove hub unit {a puller will be needed for this operation.There is a circlip holding the bearing in this needs to be removed. A press will be needed to remove and replace the ...

Ad

...remove the front hub assembly on a 2003 honda civic wheel hub assembly You need deep socket I think 30 or32 mm.for drvie shaft.all cars not the same,there is bolts which hold hub, what kind you have ...

...need to remove it. Answers on grinding the stud or knuckle don't work. Unfortunately the hub has to be driven or pressed out. This is usually a job that requires special tools not typically in the ...

Question about Honda Civic

1 Answer

...front drivers side wheel is broken & needs replaced. I'm doing the job. Safely jack and support the vehicle,remove wheel and tire assembly,with a punch and ball peen hammer (and safety glasses) or ...

remove wheelsremove rod endremove strut boltsremove center wheel boltspress center shaft off or use a brass punch drop rotor assembly downpull shaft out ( check for circlips or bolting plates) hi, the

...Remove the front wheels. Remove the caliper assembly; do not let the caliper assembly hang by the brake hose, instead support it with a piece of wire looped around the front spring or control arm. ...

Question about Honda Civic

2 Answers

need help to change front wheel stud on 1999 honda civic EX 1. first take the wheel off so you can see the the caliper and the rotor. make sure the car is on stands and not just waving around on a ...

...front brakes (metal on metal) and hubs and bearings when my 05 honda civic only had 70,000 miles on it compared to the fact that my 02 dodge intrepid never had work done on the brakes nor wheels when ...

Question about Honda Civic

2 Answers

...Remove rear brake pin retainers (2N386). ( I think it is a T 40 torx bit you need) NOTE: It is not necessary to disconnect hydraulic connections. Lift disc brake caliper from front disc brake caliper ...

Not finding what you are looking for?
1994 Honda Civic Logo

1,021 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 Honda Civic
1997 Honda Civic

1,130 Questions

1998 Honda Civic
1998 Honda Civic

1,041 Questions

2003 Honda Civic
2003 Honda Civic

811 Questions

1991 Honda Civic
1991 Honda Civic

722 Questions

1995 Honda Civic
1995 Honda Civic

687 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...