...bleed the front two and it helped the problem. But all the wheels are still getting hot which means I have not truly found the issue. 1. new booster 2. bleed all the brakes 3. adjusted the at the ...
...of actuating the pedal and bleeding at the slave cylinder. look dude it sounds like you have air in your line all you have to do is bleed it and thats simple the vaulve is at the front of the ...
...bleed the system (similar to bleeding brakes), the bleeder screw is on the slave cylinder on the front side of the transmission. If the level is low, you should also check for leaks in the system ...
...front), on top of the transmission. It has a rod sticking out the end, which conntects to the clutch throwout rod, and a bleeder fitting on the cylinder. If you can get a Clymer, Haynes, or similar ...
Question about Honda Accord
...bleed slave cylinder and see if this corrects problem. NOTE: make sure clutch master cylinder fluid level is at appropriate level prior. to bleeding system . clutch master cylinder is located on ...
...Front brakes work back brakes won't. When bleeding them the brake fluid comes out the front brakes but no brake fluid comes out of the back brakes. Anyone know what the problem is? sounds like only ...
Question about Cars & Trucks
...front brakes drag so bad that they are red hot. What do I do to fix this problem? This seems to be an adjustment on the pushrods. you misadjusted the push rod. It's too long and that's forcing the ...
Question about Honda Accord
brakes. Disc front? Drum back? All drum? If there are drums, the shoes have to be manually adjusted with the little threaded spreader bar. Discs self adjust. When you're bleeding the brakes, keep lots
...brake system! First to bleed is the brake master, front wheels, brake limiter, and the rear brakes. Try that first and make sure no air is in the system! Tell us afterwards to assist you
front brakes are dragging on the 97 oldsmobile bravada.my pedal has endplay before the rod engages with the master cyclinder. I replaced the master cylcinder adn flushed the front brake lines. Hi, Try
1,149 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
