...none of the cylinders have any??? what would cause this? if is a H22a4 or h22 motor, u need to get the timing marks lined up then put the belt on, make shure it is a h22 bent and not a F22 SOHC ...
what would cause my timing belt to rub? i have a 98 prelude h22 motor worn pulley or outbalanced shaft.
...timing belt needs replaced. on a 1988 honda prelude si with a 2.0 fi engine dual overhead cam well get on with it its not difficult,jack under engine with a block of wood on it ,take weight of engine ...
...timing belt not camshaft for future knowledge when considering a vehicle for purchase ---ASK or find out if it's what's called an interference motor or the non interference design ---if you snap the ...
Timing belt for wear and tear other belts be it V-belts or Serpentine radiator fluid (older than 3 years needs a flush and fill) transmission fluid and filter change. if its a manual transmission then
...the timing belt, make sure the belt did not jump or break, the cover top will need to be removed or pryed open after removing the top bolts so you can look at the belt good luck and i hope this
timing belts are all pullies lined up feel around every one for nics the smallest nick can eat a belt in no time One suggestion would be: Closely examine all your Pulleys/Guides For defects. Secondly:
Question about Honda Prelude
...things 1 you broke the timing belt and the pistons hit the valves sticking one thru a piston, thats why it wont turn over 2 you have a wiring problem keeping enough voltage from getting to your ...
88 prelude dual carb it pops at anything past part throttle, ive changed both fuel filters and the timing belt. hi check the fuel pump you have a lot of fuel inside the motor
...timing marks on the belt for a 1991 honda prelude I don't know if you know this but Honda engines turn backwards. Looking at the front of the motor Honda engines turn counter clockwise. All others ...
186 questions posted
Usually answered in minutes!
231 Questions
172 Questions
154 Questions
137 Questions
114 Questions