1988 Honda Prelude "slay" Questions

...back up. It won't shift either. either your one of the 2 punps on could be bad usually the master slay cinlinder cluch ...

i have a s10chevey truck and it don't want to go in gear if i turn it off it will go in to geaR 1996 Sounds like the clutch master/slay cylinder is not moving enough or the engine is idled up too high

...4th 5th fine. when it gets warm, its worse. sounds like your fluid is low in trainsmison or your slay cylinder may be needing bleeding good ...

hard to shift, replaced the slay cinder could it be it needs oil in manual transmission http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f8037806e Did ...

94 toyta pickup chage starting hard shifting gear replace slay slender not solve -change clutch not slove problem change clutch hyd master cylender not sloved broblem some one say chage transmission- ...

...and stopped when driving when coming to a stop won't go in gear nd clutch pedal goes to floor. If slay cylinder is bad will transmission have to be pulled out? generally if you follow the line down ...

... But EVERYTIME you changes gears from Fwd/Rev you have to cut off Vechile be for it works hydraulic slay cyclinder needs bleeding. shift pressure senser bad ,filter need changing. to many what if s , ...

...running light module often bolted right to the firewall. Those would be a good start and hopefully slay the ...

...one from your local auto part store just unscrew the little bolt on the base of the mirror and will slay upwards and using the same bottom place the new one or just get one from a salvage Jard either ...