1988 Honda Prelude "install wire electronic brake controller" Questions

...electronic control units (cruise control, automatic transaxle ECU, etc.), keeping them advised of the selected gear. Fig. 1: Reverse lamp and neutral safety switch functions are both controlled by a ...

...install a electronic brake control (POD) on my Chevrolet Astro 2000. I have already a big harness installed at the rear and I would like to know what the color codes mean. Also can I use the 25 amp ...

...install an electronic trailer brake controller in a 1995 GMC Suburban 1500? a brake controller has 4 wires on it, Black, white, blue,red. Black is positive battery 12 volts connect to 30 amp circuit ...

...install a brake controller on a 2005 Jeep Grand Cherokee for electric trailer brakes? I am wondering if Chrysler has a complete wiring harness on this truck or if there are some specific parts that I ...

...install Load/Balance resistor in circuit between Brake/Turn and Ground wires on socket. Which wire is which? (3-wire socket) Instead of that, see if you can get an electronic flasher unit for your ...

...electronic brake control for trailer. Thought there would be some type of plug instead of wire spliceing ? I couldn't find one. There is not a quick plug. You will need to hardwire it. This can be a ...

install and make sure it works if not RTM read the service manual , on topic this care is ODD see this chapter in the service manual if opted day1. Electronic Parking Brake Description tip if ice berg

...Electronic Brake Control Module (EBCM)...This is caused by a poor ground connection to the EBCM...The ground connection is located on the frame beneath the drivers side door...If multiple grounds are ...

Install a scan tool. Turn ON the ignition, with the engine OFF. Use the scan tool in order to clear the DTCs. With the scan tool, perform the Automated Test. Does the DTC reset as a current DTC? -- Go

...electronic trailer brake controller The trailer light harness should be live. If you turn the ignition switch to run and set the turn signal on you should be able to use a test light and watch it ...