2001 Cadillac Catera "dry shaft cars" Questions

...dry pavement and the car just stopped like it was in neutral, but the drive shaft still spins it has quiet clinking noise just wont move i don't know what is wrong. Pinion gear is out. You will have ...

...to turn sometimes. Dry steering links.Broken rubber boots on rusted up ball joints,tie rod ends, or dry steering shaft u joint, dry steering rack broken outer boots. Shock towers dry at top

...set correctly. IT can be from worn slip joints and dry u-joints. Have a engineering shop that specialises in tail shaft manufacturer to check it out as they will have the gear to check all the

...SHAFT IF SO REPLACE PUMP IF NOT DRY OFF ALL FITTING WITH DRY RAGS REFILL PUMP IF NEEDS FLUID ,RESTART CAR AND SEE IF YOU CAN DETERMINE WHERE LEAK IS COMING FROM , CAUTION IF YOU HAVE LOST MOTION ...

...shaft at the bottom of the wiper arms are dry an tighten on the shafts. If you remove the wiper arms and the dust cap under them you may be able to free up the shafts by spraying WD 40/ CRC on the ...

...dry [no grease] U-joint in your drive shaft. You can check the rear U-joint by removing the U shaped clamps which hold the U-joint & drive shaft to the front of the differential. Very carefully ...

...of the clutch not releasing. Usually a dry or dirty input shaft bushing or bearing will make some kind of noise when the clutch pedal is depressed when the engine is running while shifting

so can the U/Joints. on front wheel drive , check the cv joints , dry oil seals , the drive shaft inner cv joints have a thrower plate that may be bent. worn or binding brakes can make this noise also

...the top end of the shaft and the balls may be dry or the cage has broken. Check that the steering wheel lock is actually free of the wheel and is not still trying to engage the lock on the ...

95 jeep wrangler clunking noise when clutch engages Did you have a look at the prop shafts universal joints if they are worn or dry? Also check the sliding joint for wear if the prop shaft has them.