1999 Cadillac Seville "change running board light" Questions

...light have been on. and it idles high. on the message board it read service charging system still. I charged the battery fully but no luck. can u help me? Take it to auto zone and have them run the ...

running). Ideally it should be 100 millivolts or less (.1 volts). Anything close to 1 volt indicates a current problem or a developing problem. Repair/clean the fuel level sensor ground as needed. It&

I have a 2006 mountaineer with power running boards, after I changed the battery neither one of the boards work now. the interior lights and the door ajar lights work. thanks If you have a information

...running lights, blinkers, and flashers but no brake lights. I changed a swtich which was on the break peadel (blue and white in color) no change. check rear circuit board for lights-they maybe ...

board. changed fuse in the trunk.and changed switch under brake pedal. still no brake lights. try taking a wire brush to all the ground wire ports on your vehicule specialy the ones in the rear of the

...evening August 12, 2008 Conclusion ..Change everything going forward so you do not need to run around like I did from one store to another! Circuit Board : New Bulbs : New Fuses : New Thank ...

...board lights also do not work, they both stopped operating at the same time..i have changed fuses in the main fuse box under the hood and the same results Hi,maybe i can shed some light on the ...

...running board light, now all windows, dome lights and power mirrors stopped working. Sounds like a fuse gone. Look in your manual for locations, but you should have a fuse panel under the hood. Check ...

...change running bd lit on 97 exp you have to get down and slide under the running board go under where the light is and if you look closely there is a round cover with a hole mounted under each light ...

...Running lights work. Bulbs good, fuses checked. Turn signal clicks really fast. I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs ...