1991 Cadillac DeVille "adjustment cable shift" Questions

...adjustment however check your linkage /shift cable. Somethings off track You must have inadvertantly connected the linkage in the wrong position! It is a round shaft with two flat spots you can start ...

...adjustment spring loads. Pull the cable end completely forward and release it. (When the cable is pulled completely forward and released, the adjustment spring will position the cable to its most ...

...cable adjustment. 5. Adjust the cable length by turning the adjustment nut to make the cable longer for Park or shorter for Drive. 6. Tighten the lock nut to secure the cable in its new position. 7. ...

cable can be adjusted on this vehicle to correct the shift control lever and selector lever positions. To check if an adjustment is needed, place the shift control lever in the Park position and check

...cable adjustment. (Refer to 23 - BODY/INTERIOR/
FLOOR CONSOLE - REMOVAL)
(3) Loosen the shift cable adjustment ***** (Fig.
110).
(4) Raise vehicle.
(5) Unsnap cable eyelet from ...

lever ball stud. (6) Lock shift cable into position by pushing upward on the adjusting lock button. (7) Remove and discard the shift cable adjustment gauge clip from the park gate of the shifter. easy

...cable adjustment is important to proper interlock operation. The gear shift and park lock cables must both be correctly adjusted in order to shift out of PARK.

ADJUSTMENT PROCEDURE

1. ...

...shift cable and the select lever on the Transaxle do not line up. How do I adjust the shift cable. I have already made the max adjustment to the cable at the shifter in the car. replace cable if ...

the trans again,be sure to get that fixed quickly, also, some trans builders remove the wave plates in trans ,that will cause a hard shift , most likey ,the cable, hope this helps you, thanks robert b

...cable for proper adjustment. Remove the console, put shift selector in N (make sure wheels are blocked), remove lock pin from cable adjuster, check that the hole in the adjuster is perfectly in line ...