1990 Cadillac Brougham "idle adjustment" Questions

Ad

Question about Cadillac Brougham

1 Answer

...runs rough when warmed up and stalls when i put it in gear....I've already changed the tps, idle air control valve, vacuum hoses, spark plug wires, spark plugs, distributor cap, and rotor ...

Ad

...coller weather I now have to keep pumping the gas to keep it from lossing spead. It runs fine at idle and once it gets air flow, at full throdle. But anything inbetween problems. I have to punp

Ad

Question about Cadillac Brougham

1 Answer

...idle adjustment set at the factory , you don't want to mess with that . The PCM / ECM ,engine computer controls the idle speed by the idle air control valve (motor) . You may have a dirty throttle ...

Question about Cars & Trucks

1 Answer

...adjustment ! Most older cars had 2 adjustments , a air screw for enrichment and throttle screw for engine idle speed, later models did away with the enrichment screw, to adjust set idle screw to 600 ...

Question about Cars & Trucks

1 Answer

Idle adjustment at carburator end most older cars had 2 adjustments , a air screw for enrichment and throttle screw for engine idle speed, later models did away with the enrichment screw, to adjust ...

how do you adjust the idle for a 2002 gmc safari the idle isn't adjustable. you might want to have the idle air control motor checked out. they are prone to sticking in the open position allowing more

How do I adjust the idle speed on a Toyota Corolla Verso How do you adjust the idle speed on a Toyota Corolla Verso you can adjust the idle air right at the air intake From about 1992 models, subject ...

...idle) are at low adjustment? my carburetor idles high and goes back to normal idle after 5 minutes of not reving...it also idles high when the clutch pedal is pressed...the adjustment screws (mixture ...

Question about Cars & Trucks

1 Answer

...base idle adjustment and could also have an idle speed control motor.The base idle screw should be on  the driver's side of the carb.  You would also have a fast idle screw on the

...adjustment screw.  To adjust the idle, you will need to move the TPS (Throttle Position Sensor) forwards or backward.  To do this, you will need to remove the tamper proof bolt and replace ...

Not finding what you are looking for?
1990 Cadillac Brougham Logo

62 questions posted

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...