...wheel lug YOU CAN PRESS OUT BROKEN LUG STUD WITH STUD REMOVAL TOOL AND INSTALL A NEW STUD.THE TIRE SHOP WILL FIX IT.WONT COST THAT MUCH.IF YOU DONT HAVE RIGHT TOOL YOU CAN DAMAGE WHEEL BEARING IF YOU ...
wheel stud is broken need to fix it The studs press out and in. Perhaps a hammer would work. Replacements studs can be purchased. Need to remove hub, of course. Take of wheel, Next remove out old stud
...Broken studs can be knocked out(towards drive shaft ) of the hub assy with a suitable drift and hammer (splined into hub) . The studs are a servicable replacement part. Check all other wheel nuts as ...
...broken on right rear wheel I am trying to get information on how to do the job do I have to take the center nut off to fix them or is there another way the correct way is to remove the hub and use a ...
Broken, Missing Wheel Stud When I bought the car I noticed it had a broken or missing wheel stud on the front driver side. I am just wondering how hard it would be to replace it and if any special ...
...broken lug nut studs on my 04 F-150 2x4. Its the drivers side rear wheel. I don't have aton of money and wanna fix it myself. how do I do it. Go to a NAPA store and either ask them, when you buy the ...
...broken wheel stud? driver's side rear wheel stud broke off, was rusted over. can i replace it myself? How? yes. you can either ,tap it out,or remove the disk,and press it out. then, ...
...broken wheel stud son was changing flat. broke stud on drivers rear. do i just pound out the old stud and pound in the new? Half right...pound out, use a stack of washers and put nut on backwards and ...
...broken lug nut on kia sorento Most likely you will have to have it pounded out and replaced with a new wheel stud. These are vehicle specific and are sold at auto parts stores. If you can take a lug ...
161 questions posted
Usually answered in minutes!
144 Questions
134 Questions
136 Questions
108 Questions
86 Questions