1997 Acura RL "removing broken light bulb" Questions

Ad

...light does not work I don't know if it is a wiring problem or if the bulb should just be replaced ... and if so is it hard to replace the bulb They're easy to swap out. I recommend looking at your ...

Ad

Question about Acura RL

2 Answers

...removing fastener watch for assemblies to have an aleignment pin. remove assemblies and twist connector to remove bulbs. if their dark colored, or you can see the wire broken replace with the same ...

Ad

...broken light is. Carefully unplug the four-way connector from the light cluster. (If there is a safety catch on the connector, the connector can be gently removed by using a plain flat head ...

...broken light buld that is stuck in the socket? How do I remove a broken light bulb that is stuck in the socket. I forgot if the switch is off or on? Use needle nose pliers Go inside the bulb & ...

Question about Acura RL

1 Answer

...light, remove Bulb plug from it's socket, remove each bulb, check if there's rust or corrosion in the bulb socket if so clean them, check wire for loose, open or broken wire ! Check if Ground is Good ...

broken. The light bulb can be seen when pulling out the middle knob, but it's hard to reach. How to take the bulb out? Youi have to remove the lower finish panel, and then the center finish panel, and

light cover & wiggle the bulb while the door is open, or best to have two doors open to remove the possibility of a faulty switch. If it still doesn't flicker or start to work remove the bulb &

Question about Acura RL

1 Answer

...broken tail light can you show me how to into the panels to remove the tail lights? shouldnt need take panels off just undo the slats take out the bulb circuit and in you go :) think theres a couple ...

Question about Acura RL

1 Answer

...broken wire to it also.check with a test light to confirm you have power to the bulb when brakes applied,this will take 2 people 1 to press brakes and1 to check for current with a test light at the ...

...good still does not work stop light was out so removed tail light and replaced bulb works now but signal light does not Check for voltage at the connection, could be a broken wire or a bad ...

Not finding what you are looking for?
1997 Acura RL Logo

210 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1996 Acura RL
1996 Acura RL

134 Questions

2000 Acura 3.5RL
2000 Acura 3.5RL

136 Questions

2005 Acura RL
2005 Acura RL

108 Questions

1998 Acura RL
1998 Acura RL

91 Questions

2002 Acura 3.5RL
2002 Acura 3.5RL

86 Questions

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...