1996 Acura Integra GS-R "light switch" Questions

...light switch mounted on the brake pedal bracket. Loosen the locknut and unthread the switch from the bracket. To install: Install the switch. Screw the brake light switch in until the button is fully ...

...on the battery & got the ignition back on but when I try to start it doesn't turn over & all the lights dim. Also when I step on the brake pedal, the lights dim. I hadn't started it for 3 weeks

...light switch Hello, I had the same problem with my 2004 TL, and it was the brake light switch. It is very easy to replace. (10 min) it will only cost $6.95. To replace: Remove the black cover ...

...light will sometimes come on and intermittently go away. The battery and connections are brand new. I tested the alternator at two different shops and they both passed it. Its putting out good ...

on my 94 integra my low beam lights dont work but my brights do, and all fuses and relays are good sounds like you have a bad head light switch(multi function switch).

light its probably the sensor underneath the center console. You just need to remove the center console to gain access to the switch. Then play around with the switch a little bit until you figure out

RE: headlights/brake lights work but running and rear lights dont i have recently purch'd a cherry 99 acura integra with 62,000mi onit. the dash lights along with the running and parking lights in ...

light switch but don't know where else to look. There are no visible switches in the doors. acura grand AM.? this a motor swap? bad door switch. the factory service manual covers this, is great detail

...light switch? I would like to start by changing the fuse but don't know which it is. Mt tail lights and turn signals still work. Check the owner's manual. There are fuses under the hood as well as by ...

Engine off. Parking brake set. Brake lights remain "on"? Pull the brake pedal up as far as you can while someone else watches the brake lights. If the brake lights go out the switch has ...