1992 Acura Integra Hatchback "abs light" Questions

abs light is on will i fail inspection? i live in New Jersey. IF THE ABS LIGHT STAYS ON WHILE SITTING STILL OR MOVING.IT COULD BE ABS UNIT.A BAD OR ABS RELAY.OR BATTERY VOLTAGE LOW. IF ABS LIGHT COMES

abs light on My brakes make a click click noise when applied. Also the ABS light stays on. Get your abs checked out. If you want, check it yourself on an empty street, just be ready to have a dead ...

...ABS light. The ABS light will turn on/off followed by the system pressure pump noise. Weird thing is my battery light will go off when I turn the lights on? The ABS stays on, and yes, the battery is ...

...abs light come on, and will this cause a rotten exhaust smell? MAP stands for manifold absolute pressure. It will not cause your abs to come on. The systems are totally separate. When your abs light ...

abs light stays on the abs light on my 92 integra stays on. is there a problem with my brakes? your brakes are fine it's just telling you that the abs is no longer on . This means if you have a panic ...

ABS light is on mt 1992 acura integra Your ABS (anti-lock brake system)has to do with your brakes. Check your brake fluid to make sure it's a the maximum level if so you may need new brakes. Hope this

...ABS light on my 1996 Acura Integra? Take out the dash bezel, then the guage cluster. The ABS light plugs into the back of the cluster. uplug it and let it hang or put a piece of electrical tape over ...

...abs light that stays on & now i hear noises coming from the back passengers wheel i was tols it was a sensor i had the same problem in my 1996 gsr i just disconnected the abs system all together, ...

...ABS light came on. Then the RPM's dropped to 500 and then the lights started pulsing and it acted like it was going to die, this is when we were sitting in stand-still traffic. We were in the middle ...

the maintenance required lights is on, what do i do? and so is the abs lights. you need to change the brake pads take it to the dealer to have them do a reset