Question about Acura Legend
do cam shaft arrow on the car hav to match in the same position as the cam shaft arrow on the replacement heads before i take the engine apart??I HAVE A 1993 ACURA LEGEND yes you should always have ...
How do I get the timing right on a Acura legend. You have to adjust the cam or cams depending on rather or not its a dual over head or single cam motor, with the marks on the crank shaft and oil pump ...
changeing engine lifters an cams what is the fireing order for a 3.2 v6 cylinder1991 legend am changeing out some lifters an cams i need to no the fireing order before i start The firing order on your
even after replacing the radiator, thermostat and first it started with the crank/cam sensor coming apart behind the drivers side cam gear causing the engine not to run. when replacing this i found ...
...acura legend with a 2.5---the car will not start--it starts for half a second and shuts down--the cam sensor was destroyed as the cam toothed wheel rubbed against it-(the cam sensor looked ...
...to set the timing on a 91 acura legend Ok i got a 91 Legend. The repair manual says to lock the two cams in TDC. So find the blue driver side and red passenger side timing marks on the sprockets ...
HOW DO I SET THE TIMMIG WIT DULL OVER HEAD CAMS ON A 3.2 V6? THANK YOU FOR YOUR ASISTANCE buy manual and follow instructions carefully, don't rush, fully read and understand manual
i have noticed ,when im driving the rpm isnt going up Check the crank and cam sensors
how to put cam rocker in tell state of disassembly< we are blind here. and what engine, there are many engines, used world wide in Acura's the displacement. or the engine number. the ? (if yes, you
How I can correctly insert timing belt in Acura legend 2.7L 1989 ? Check it through a couple of rotations to make sure the cams are aligned. You will need a good manual. This is a complicated + $500 ...
132 questions posted
Usually answered in minutes!
283 Questions
259 Questions
188 Questions
147 Questions
113 Questions