2003 Honda Odyssey "tensioner pulley" Questions

find tension pulley release Undo the nut holding on the pulley until it is loose . Behind the bracket holding the pulley shaft you will find a long threaded bolt that moves the shaft up or down a slot

...tensioner pulley is on a spring loaded arm. Get your socket on the center nut of this pulley. Slowly pull the ratchet toward the center of the engine. The pulley will pivot on the arm allowing you to ...

...tensioner. Remove the crankshaft pulley and install the lower cover. Install the crankshaft pulley, lubricate the bolt threads and both sides of the crankshaft pulley bolt with fresh engine oil and ...

How to loosen the fan belt to get the altenator off? There is a idler pulley that keeps tension on the alternator belt.... it is spring loaded, use a breaker bar and a socket (to place on the molded ...

noise coming from near compressor, drive belt broke Sounds like belt tensioner pulley or idler pulley assembly.

1996 honda odyssey belt breaks that runs from balancer drive pulley to the oil pump. What is causing this problem? Try to sight down the belt to see if it is out of alignment at either point. Over- or

which way do you turn the crankshaft pulley bolt to loosen it? Trying to remove crank shaft pulley bolt. Which way does the bolt turn? It turns left (counterclockwise) to remove. An impact wrench is ...

...on, why? I have purchased a new belt, that has the same part number as my old one. I changed the tensioner. My pattern is correct. But my belt keeps jumping off. I am able to turn three of the

...pulley be at rest on the timming mark or loaded i adjusted the cams to line up the marks, but the left cam is loaded and is hard te keep on mark. is that normal Quite normal on lots of cars. You need ...

squealing noise when i first start engine with ac off It is likely one of your drive belts is slipping on the pulleys, a very common situation. Adjust the tension up a bit.