2003 Honda CR-V "intake manifold runner control sensor" Questions

2003 Honda CRV manual transmission 4WD P0661 DTC error code P0661: Intake Manifold Runner Control (IMRC) Valve Position Sensor Circuit Low Voltage.

intake manifold runner control) Valve Position Sensor Circuit Low VoltagePossible causes include broken vacuum hose to IMRC valve, faulty IMRC position sensor, faulty IMRC control valve, or faulty ECM

...intake manifold runner control which could cause the other two codes. P1518 FORD Description The Intake Manifold Runner Control (IMRC) is monitored for failure during continuous or key ON engine OFF ...

...code p200a Had machine hooked to it code p200a. Intake manifold runner. Could be a dirty intake manifold, the sensor, the motor that controls it, or wiring. The runner are valves inside the

...intake manifold supports.8. Remove support brackets at the intake manifold front corners and MTV.9. Loosen upper fastener attaching throttle body to support bracket.10. Remove clips attaching EGR ...

...Intake Manifold Runner Position Sensor / Switch Circuit ... https://www.obd-codes.com > p2017 This code is mostly concerned about the value provided by the intake manifold flow control valve/position ...

...Intake Manifold Tuning Valve. I believe it's connected to the engine. would that be the mass air flow or volume air flow sensor that controls the mixture in the ECM You are taking about the IMRC ...

...Intake Manifold Runner Control (IMRC) electric actuated system Intake Manifold Swirl Control (IMSC) vacuum actuated system Intake Manifold Tuning Valve (IMTV) These subsystems are used to provide ...

intake manifold runner controls are stuck open.They are controlled by vacuum solenoids.The P0171 is bank one of the engine is running lean,usually caused by a vacuum leak, P0420 is catalytic converter

...intake manifold runner control bank 1 stuck open p1538 intake manifold runner control bank 2 stuck open Your engine has IMRC (intake manifold runner controls) that are supposed to stay closed under ...