2003 Honda Accord "cruise control" Questions

...cruise control stopped working Hello, I got my timing belt replaced a week agao and I just noticed that my cruise control no longer works. The cruise control was working before the belt was replaced. ...

...cruise control problem) When I turn on the switch of cruise control and set it up, the light on the dashboard come on but cruise control (in fact) doesn't work . I was trying to change the fuse but I ...

Cruise Control Not Working, Fuse OK, where do I go next? my 1997 honda accord cruise control fuse blow and the car start up but will not go in gear. I change the cruise control fuse the car goes in ...

...Cruise Control Immediately after Dealer, Nalley Honda, put new battery in the car, I drove on the expressway and set the Cruise Control for 55 mph. It ran 2 minutes then started slowing down. I tried ...

...Cruise Control Solution #1 posted on Oct 31, 2008 T4chnician In response to the request from "emissionwiz" for more clarification of the problem: This same 1995 Honda Accord was stolen in Atlanta, GA ...

...cruise control form working). Finally check all of the fuses. This system needs at least 3 different fuses to work properly. I thought that my cruise control was not working also. But, I just wasn't ...

Cruise control doesn't work in 88 accord. The light works on the dash, but the buttons on the steering wheel won't work. Hi!! Let's start by checking the cruise control throttle linkage cable, just ...

...cruise control dash switch light comes on, but set/acc switch will not set problems with cruise control include , clutch switch, brake switch , low road speed , control module , speedo sender unit ...

...cruise control has stuck on the the vehicle would accellerate. The only way to shut the cruise off was to put the vehicle into neutral and shut the car off. On the first occasion when I started the ...

...cruise control stopped working the light on dash does light up,but no cruise now my question am I suppose to reset anything? no, no reset. you have disconnected the cruse wire. look for the cruse ...