2001 Honda Odyssey "remove wheel change headlight bulb" Questions

...the headlight. To change the headlight on the 350Z it's a pain. Basically you need to remove the front wheel. Then remove the plastic guarding of the wheel to gain access to the headlight. FUN

...remove the wheel assembly if u can't get your hand up into the wheel well, but remember to turn the wheel so that there is clearance, there will be a round spin on type cap leading to the headlight ...

...remove the front bumper. I saw a posting that said you could reach the headlight unit from the wheel well - removing the wheel & well cover. I will be working on my CL and keep you posted on what ...

...Remove the wheel behind the headlight in question, now you would have room to change the bulb without removing headlight • Removing the assembly: Remove the Facia and the bumper, and you can now ...

...remove the wheel well liner (two bolts and two plastic push pins). Pull the wheel well housing back (you will need to turn the wheel/tire to gain access) and using a 7mm socket remove the plastic ...

wheel all the way left remove one plastic screw and anchor from top of wheel well with phillips. Flex back inside wheel well panel. turn bulb cover counter-clockwise to remove. Unclip wire from top by

remove the entire wheel on the corresponding side) You'll need to remove 3-4 of the fender well clips with a phillips screwdriver being careful not to break them. Once the screws are removed, pry back

...wheel to give better access, remove screws, peel the inner fender back to get your hand into the space, and remove / replace the bulb. You will not be able to see what you are doing, so you will be ...

...remove the wheel splash shield to replace either the high- or low-beam bulb. According to technical service bulletin No. 10-08-42-001C, the low beam headlight connector may melt from excessive bulb ...

wheel to the left. Use a flat-tipped screwdriver to remove the holding clip from the inner fender, and pull the inner fender cover back. Remove the socket from the headlight assembly by turning it one