2001 Honda Odyssey "cause return line power steering" Questions

...but I am religious with checking the fluid. And yes I am using Honda fluid. ANY advice is appreciated. Check for a clogged or pinched feed line or return line between the pump and the rack valve

power steering cooler return hose at reservoir & add a hose to a bottle under vehicle On a Honda you need Dealer Only Fluid & add to container,then crank the motor to flush out the brake fluid

...return line it could be pulling in air and causing the foaming and noise. If there are no leaks you fill the reservoir with power steering fluid and crank the car then turn the steering wheel all the ...

return line off right where the hose connects to the steering gear. It has happened several times in the past week no matter what has been done to fix the issue. The hose still seems in good condition

...return hose cause i got small ones steering is smooth just dont know where else it can be leaking the fluied it quite annoying right now and i perfer not to loose the pump or pully or belt\ have your ...

...return line is a length of hose that is cut for you, costs anywhere from $3 -$12 - this is also a pain in the ****, due to the limited amount of room to work with and as well as the power steering ...

...Return line. If its leaking at the Pump where your hoses go in it might just be a Rubber Seal. But the most common problem is a Hose is Busted Open. Please Let me Know by Voting For me on the Quality ...

...return lines. Lack of fluid causes cavitation and unit overheat. Hope this helps. Note: had a ford with factory defect in pressure line in my shop, steel fitting into hose not set correctly, caused ...

return line replaced. Had that done then got it back and it was making a 2-3 second noise (simular to the noise you hear when using your washer fluid) only right when you start up the truck when cold.

return line. Actually I would need a book on it. What I would suggest is trying to tighten it just a little. Don't overdo it cause that is easy to do. You can also loosen it and throw some thread tape