2001 Honda Accord "turn signal cam" Questions

turn signal won't turn off Is the cam inside the steering column to the lever worn or broken and you have to turn off manually after turn? Need to replace the plastic cam the lever moves then. Will ...

no cam position signal check that the cam shaft is turning ( broken timing belt/chain) check wiring and sensor position (air gap)

...turn signal not working. They will work if i manually hold the turn signal. Is this a fuse? no, there's a cam in the turn signal switch which keep the signal work until you turn the wheel to cancel, ...

turn the engine's crank with a wrench until the cam sensor signal drops to zero volts. You should be able to see the signal voiltage switch between 5V and 0V while turning the crank slowly. If so, the

after turn completed the rt turn signal will not deactivate have the turn signal cam or switch checked out.if turns off manually sounds like the cam or clockspring under steering wheel bad

...and country. turn signal cam is worn or broken you have to pop your colum which is screwed upper and lower and remove the steering wheel be carefull of the airbag and then carefully replace the

...turn of a crank shaft, witch also has a crank position sensor and produces a a/c signal, this signal go to the PCM. the crank position sensor lets the PCM were cylinder #1 is at all times, cam ...

...turn the signal switch does not return to neutral 1996 buick park ave sounds like the signal canceling cam is not operating for one of 2 reasons. Either the cam canceller is broken or the signal ...

...turn signal won't cancel turn signal will cancel for a right turn but not a left turn. It will go on when signaling a left turn but will not cancel after the turn. Is it the cancel cam or just the ...

...cam signal at PCM" however, a crank sensor can also be the cause of this code. A cam sensor normally will not cause a no-start. I can cause a long crank time before starting. The cam sensor signal is ...