2000 Honda Prelude "wiper arm lose" Questions

wiper arm is loose by looking at the center piece on the Left arm. if you see the motor moving the center piece but the arm isn't moving, this will confirm a loose arm and you will need to tighten the

...arm nut or wiper arm clip without losing them inside the cavity? I tried the access openings and partially pulling the motor assembly out after removing the mounting bolts but that doesn't seem to be ...

...check the tension on the wiper arm itself...there is a 12mm locknut that will go lose and it being lose will cause the arm to slip on the shaft...there is a cover on that wiper arm hiding that ...

...wiper arm first....where it attaches to the linkages....sometimes they get stripped out and will not rotate....I once had a Kia, and where the motor would connect to the wiper arm linkages it would ...

...wiper arm attaches. You can try to tighten this bolt alittle tighter. just make sure they are in the rest position (normal position) and wipers off. if that bolt is tight , then it could be some worn ...

How to change wiper arm 2002 Nissan Frontier lift up wiper arm from windscreen , lose the nut, and shake it little , it will come out.

can both wiper arms get stripped at the same time Possibly, but it could be an arm came lose or broke from the wiper transmissions to the motors.

Wiper blades hit the hood of the truck when turned on the right side Remove the cap and remove the screw.Shake the arm and remove from the cone shaft. start the wipers and stop,let park and install ...

...wiper arm. Find one at a junk yard for a few bucks. The Saturn arms are all pretty much the same size, take your old one with you to make sure. Pull off the plastic cap if it is still there and ...

...wiper arm off to check the drive mechanism sound like you had your wiper on when your windshield had ice formed on it then you stripped the arm. normally you can lose the nut on top of the arm pivot ...