1992 Honda Prelude "replace alternator fit" Questions

...2) loosen the adjustment bolt located on top of the bracket until the belt can be removed and a replacement fitted. Regards ...

...replace the alternator. Well the alternator is driven by a belt. You should be able to look at the alternator and tell if it has been replaced by how clean it is. Are you sure you need to replace it. ...

...alternator from the front. Turn the tensioner until the old belt is loose enough to remove, then turn it further so that the new belt will go on easily. Replace the belt and re-tension until you have ...

...replace an alternator drive belt that is on an inside pulley is to remove the outer belts before the inner one can be fitted. To fit inner belt, loosen the adjusting clamp and mounting bolts on the ...

...replace it. Ok...fine, it should go even SMOOTHER now that I know what I'm doing. Well, I went to put the new alternator on the housing/brackets that it bolts to and it won't fit. It looks like there ...

just fitted replacement alternator,it has 3 terminals where original has 2. whats 3rd for. ford escort 98 diesel van 1.8 YOU HAVE THE WRONG ALTERNATOR.ANY TIME YOU BUY ANOTHER ALTERNATOR IT SHOULD BE ...

replace alternator? I heard that you take right wheel off to get to it? 1. Disconnect and isolate negative battery cable at battery. 2. Remove the right front wheel. 3. Remove the underbody air dam. 4

replace drive belt require to loosen of alternator mount bolts. Slide the alternator towards the rear of the car, this will slacken off the belt. Remove and fit new one. Slide alternator foward untill

...dies I take the ground cable of the battery the car dies From what you have described either the replacement alternator or regulator are faulty.all 1985 model here have the reg built into the ...

...alternator? Some aftermarket units are built for multiple applications, and may not fit exactly in your vehicle. Did you compare the one you removed with the one you're trying to install? If the ...