2003 Cadillac CTS "remove flex plate" Questions

...remove the bolts on the torque converter and flywheel I usually jam a large screwdriver between the tc and flex plate ( technically it is not a flywheel) until I get to the last bolt. Then I use a ...

...flex plate instead. The torque converter makes it act a lot like a flywheel, though. But... you're probably talking about the flex plate or the ring gear around its edge. This is going to require ...

...FLEX PLATE ONCE AND IT CRACKS, GET LOOSE AND NOISY (HAD TO REMOVE ENGINE) HOW CAN THIS BE FIXED SO IT WILL LAST LONGER-RON sounds like it is incorrect flex plate for bolts to keep coming loose i ...

...remove the ring gear from the flywheel and fit a new one If it is an auto transmission besides the teeth problem , the flex plate ( not actually a flywheel) cracks and breaks off the crankshaft bolts ...

...torque converter be seperated from the flex plate or doest the torque converted come out with the engine? Must unbolt the converter from flex plate or you could damage flex plate and bushing in ...

flex plate on 96 Buick skylark remove the transmission first ( keep the torque converter with the transmission as a unit ) use an impact gun , remove the crankshaft bolts for the flex plate making you

...remove the starter on some applications) After you have removed the inspection cover most of the flex-plate and the torque converter will be exposed. Turn the engine over and use a good light to ...

...and this is causing it to hit the starter drive or other point inside the bell housing. Remove the transmission and replace the flex plate is the likely fix. Have a shop confrinm this guess of

...remove the 2 flex plate cover bolts but I can’t figure out what they are referring to. The engine is bolted directly to the transaxle Where the engine mates to the transmission there is a flex plate ...

...remove the flex plate to get to the flex plate bolts. 2007 dodge ram 3500 6 speed manual transmission theres an access cover under the turbo on the front of the bellhousing (2 10mm bolts) that you ...